• Body & Ball : SS316 • Seat : PTFE • Connection : SCREWED BSPT • SIZE : 1/2"∼4" • ISO5211 Direct Mounting Pad • Full Port

• BODY & BALL : STAINLESS 316 • SEAT : PTFE • CONNECTION : SCREWED BSPT • SIZE : 1/4"~2" • ISO5211 Direct mounting pad

• Body & Ball : SS 316 • Seat : PTFE • Connection : SCREWED BSPT • SIZE : 1/2"∼2" (DN15∼DN50) • Ball option : L-Port / T-Port • ISO5211 Direct Mounting Pad • Working pressure : 1000 WOG/PN63

• Body : SS304 • Ball : SS316 • Seat : PTFE • Flange : 10K • Size : 1/2"∼4" • ISO 5211 Mounting pad • Locking device on valve body

• Body : SS304 • Ball : SS316 • Seat : PTFE • Flange : ANSI150 • Size : 1/2"∼4" • ISO 5211 Mounting pad • Locking device on valve body

• Body : SS304 • Ball : SS316 • Seat : PTFE • Flange : JIS10K / ANSI150 / PN16 / PN40 • Size : 1/2"∼4" • Ball option : L-Port / T-Port / X-Port • ISO5211 Direct Mounting Pad • Locking device on valve body

• Body & Ball : SS316 • Seat : Ball seat with cavity filled PTFE • Connection : Clamp End • Size : 1/2"∼4" • ISO5211 Direct Mounting Pad • Locking device on valve body

• Body & Ball : SS316 • Seat : Ball seat with cavity filled PTFE • Connection : Clamp End • Size : 1/2"∼4" • Ball Option : L-Port / T-Port / X-Port • ISO5211 Direct Mounting Pad • Locking device on valve body

• Size : 1" ~ 48" (Hand Lever / Gear Operated) • Body : GG25 (CAST IRON) • Disc : Stainless Steel 316 • Liner : EPDM/PTFE/NBR/VITON • Flange : 10K/ANSI150/PN16

• Body : GG25 (CAST IRON) • Disc : Stainless Steel 316 • Liner : EPDM/PTFE/NBR/VITON • Flange : PN16 / ANSI150 • Size : DN20∼DN600 (1"∼24")

• BODY : GG25 (CAST IRON) • DISC : STAINLESS STEEL • LINER : EPDM/PTFE/ NBR/ VITON • FLANGE : 10K / ANSI150 / PN16 • SIZE : DN50∼DN600 (2"∼24") • HAND LEVER / GEAR OPERATED

With Lever and Non Lever, MODEL : SRV-L, SRV • SIZE : 1/2"-2" Screwed • BODY : BRASS • WORKING PRESSURE : 0.3-10Kg/Cm • MAX TEMP : 185°C

JOKWANG JK JSV-LT12 Series Type • Low Lift Type, Applicable Fluid • Steam, Air/Gas, Liquid, Applicable Pressure • 0.03~1.07MPa(0.35~11.0kgf/cm2), Applicable Temperature • Max. 220°C (Without lever : 120°C), Size • 1/2" (15A) ~ 2" (50A), Connection Inlet/Outlet • female screwed (PT), Material • Body : Brass

JK (JOKWANG) JSV-HT41/42/43 • High Lift Type • Steam, Air/Gas, Liquid • 0.05~4.9MPa(0.5~50.0Kgf/cm2) • Max. 220 • 1/2" (15A) ~ 2" (50A) • inlet/outlet : male/female screwed PT. At ordering, please specify the set pressure • Bonnet : Bronze • Body : Stainless Steel • Trim : Stainless Steel

JOKWANG JK JSV-HT91 Ultra high pressure Safety Relief Valve • inlet 1/2" - 1.1/8" (PT, NPT, UN UNF) • outlet 1/2" (PT, NPT) • 316/316LSS & Engineering Plastic • Max. 100 MPa • -40~100 °C • H2, N2, He, etc. • PT, NPT, UN UNF, Flange etc. • KGS

JK (JOKWANG) JSV-FF11/JSV-FF21/JSV-FF22 Type • Without lever • With lever Applicable fluid • Liquids • Steam, Air • Gas Materials • Body : Cast iron • Disc & Seat : Stainless steel • 1.5 times the setting pressure Applicable temperature • Max. 220°C / Max. 250°C / Max. -5-250°C Connection • inlet : JIS B 2210 20K RF Flanged • Outlet : JIS B 2210 10K FF Flanged

JK (JOKWANG) JSV-BF31 Type • Balanced Bellows Applicable fluid • Gas • Liquid Applicable Pressure • 0.7-1.0 (0.07-0.1MPa) • 1.0-3.0 (0.1-0.3MPa) • 3.0-6.0 (0.3-0.6MPa) • 6.0-12.0 (0.6-1.2MPa) • 12.0-22.0 (1.2-2.2MPa) Max Temperature • 400°C Materials • Body Cast steel • Trim : Staness steel Size • 20A x 40A - 100A x 150A Connection • inlet : JIS B2210 20K RF Flanged (KS B 1511) • Outlet : JIS B2210 10K FF Flanged (KS B 1511)

JK (JOKWANG) FORMAT • Pliot Operation • Full Bore Type CERTIFICATION • UV Stemp SIZE • 1" x 2" ~ 20" x 24" OFRICE AREA • D(96.77㎡)~B2(146451.3㎡) / D(0.15in²) ~ B2(227in²) ORIFICE DIAMETER • D(11.1mm)~B2(431.8mm) / D(0.437in) ~ B2(17.0in) CORRECT PRESSURE TO BE APPLIED • 0.1~68.94MPa (1.05~706.06kgf/cm²) • Flanged • -196~260°C (325°C) CRITERION FOR LEAKAGE • API Standard 527

JK (JOKWANG) distributor JSV-FF200 (Conventional Type) • Applicable : Code ASME Sec. I • Size : 1" × 2" ~ 8" × 12" • Orifice : F(0.438in2) ~ Y(76.078 in2) • Set Pressure Range : 15 ~ 5020 psig(1.03 ~ 346.2 bar) • Allowable Leakage : API STD 527

JK (JOKWANG) distributor JRV-SF16 Inlet pressure • 2~10kgf/cm²g {0.2~1.0MPa} Outlet pressure • 0.35~16kgf/cm²g {0.03~1.56MPa} Max reducing ratio • 20 : 1 Working temp. • Max. 300°C Working fluid • Steam Size • 1/2" (DN15) - 3" (DN80) Connection* • 10K/20K RF Flanged

JK (JOKWANG) JRV-ST11 Size • (1/2”), (3/4”), (1”), (1.1/4”), (1.1/2”) Applicable Fluid • Steam • Max. 184°C pressure • Max. 10kgf/cm²(1.0MPa) Maximum reducing rate • 20 : 1 • Less than 0.05% of rated flow • PT Screw Materials • Body (Cast Iron) • Disc&seat (Stainless Steel) • Diaphragm (Synthetic rubber) Valve body pressure test • Hydraulic 20kgf/cm²(2.0MPa)

JK (JOKWANG) distributor JRV-ST11 Type • Direct Acting Applicable Fluid • Water Nominal Diameter • 15A (PT 1/2") - 20A (PT 3/4") • 10kgf/cm2 (1.0MPa) Maximum Reducing Rate • 10:1 Hydrostatic test pressure • 15.0kgf/cm2 (1.5MPa) Material • Body : Bronze • Disc & Diaphragm : Synthetic rubber

JK (JOKWANG) distributor JRV-SF31 Size • 1/2" (DN15) - 1.1/2" (DN40) inlet pressure • Max. 30kgf/cm2 (0.3MPa) Outlet pressure • 0.35-5, 5-15kgf/cm2 (0.035-0.5, 0.5-1.5 MPa) Max reducing ratio • 10:1 • Max 80°C Working fluid • Air, gas Connection* • Flanged 16K, 20K, 30K Minimum pressure differential across the disc • 0.5kgf/cm2 (0.05MPa) Hydrostatic test pressure • 1.5 times the flange pressure rating

Sporlan distributor Type SBF & EBF • SBFV-AAA • SBFV-AA • SBFV-A • SBFV-B • SBFV-C • SBFVE-AAA • SBFVE-AA • SBFVE-A • SBFVE-B • SBFVE-C • SBFV-AAA • SBFV-AA • SBFV-A • SBFV-B • SBFV-C • SBFVE-AAA • SBFVE-AA • SBFVE-A • SBFVE-B • SBFVE-C ฯลฯ Markets : • Air Conditioning • Refrigeration – Food Retail • Transportation • Industrial – Food Storage units Applications : • Systems with widely varying operating conditions • Capacity ranges from 1/8 to 5 ton R-22 • Supermarket cases and rack systems, Food and Beverage units • Air Conditioning – Residential, Commercial, Chillers • Transportation – Units on Truck/Trailer, Bus and Vans

Sporlan distributor Type O OVE-15, OVE-20, OVE-30, OVE-40, OVE-55, OVE-70 ฯลฯ Application : Commercial Refrigeration, Air Conditioning, Low Temp Refrigeration, Chiller Product Type : Small O- Valve or Large O- Valve Refrigerant Type : R-134a, R-407A/ R-407C/ R-407F, R-507, R-404A, R-22, R-410A Thermostatic Charge : C, CP60, ZP, CP100, GA, CP115, Z, ZP35, ZP40, CP85, N, CP180 Nominal Capacity : 1/6 to 60 ton Inlet Connection Size : 5/8 to 1-3/8 (ODF) inch Outlet Connection Size : 5/8 to 1-3/8 (ODF) inch Maximum Operating Pressure : 31 or 48.3 bar, 450 or 700 psi Equalizer Connection Type : 1/4" ODF or 1/4" SAE, Externally Equalized Body Material : Brass Connection Type : ODF Solder

Sporlan distributor Type ER ERVE-1, ERVE-1-1/2, ERVE-2, ERVE-3, ERVE-4, ERVE-5, ERVE-6, ERVE-8, ERVE-10, ERVE-12, ERZE-1, ERZE-1-1/2, ERZE-2, ERZE-3, ERZE-4, ERZE-5, ERZE-6, ERZE-8, ERZE-12-1/2, ERZE-15 Evaporator Temperature : 40 °F (nom), 5 °C (nom) Liquid Temperature : 100 °F (nom), 37.8 °C (nom) Pressure Drop : 60, 100, or 160 psi (nom), 4, 6, or 11 bar (nom) Maximum Operating Pressure : 31 or 48.3 bar, 450 or 700 psi Equalizer Connection Type : N/A, 1/4" ODF, or 6MM, Internally or Externally Equalized Refrigerant Type : R-448A/ R-449A, R-134A, R-407A/ R-407C/ R-407F, R-290, R-404A, R-22, or R-410A Thermostatic Charge : C, Z, ZP40, CP100, CP60, GA, ZP, CP180, or N Nominal Capacity : 1/6 to 15 ton Inlet Connection Size : 1/4 to 7/8 inch (ODF), 10 or 12mm Outlet Connection Size : 3/8 to 1-1/8 inch (ODF), 12mm or 16mm

Sporlan distributor Type SR1, SR2, SR3, SR4, SRH1, SRH2 and SRH3 Series • Minimum Operating Temperature : -40 °C, -40° °F • Maximum Operating Temperature : 150 °C, 300 °F • Minimum Ambient Temperature : -29 °C, -20° °F • Maximum Ambient Temperature : 94 °C, 200° °F • Pressure Relief Setting : 10.3 to 27.6 barg, 150 to 400 psig • Maximum Operating Pressure : 27.6 barg, 400 psig • Valve Material : External : Cast Iron, Internal: Stainless Steel, Seat: PTFE • Inlet Connection Size : 1/2" to 1.1/4" • Outlet Connection Size : 3/4" to 2.1/4" • Orifice Size : 10.4 to 19.05 mm, .409" to 3/4" inch • Air Flow Rate : 130 to 1776 SCFM, 10 to 164 lb/min • Application : Vapor Only

Sporlan distributor Type • CDS-16, CDST-17, CDST-2, CDST-4, CDST-7 , CDST-7, CDST-9, CDS-17, CDS-2, CDS-4, CDS-7, CDS-9 Application • Electric Evaporator Pressure Regulators Refrigerant Type • All common HCFC and HFC refrigerants including R-410A and subcritical R-744. Motor Type • 2 Phase Bipolar Wet Motor For Fluid Type • All common Mineral, Polyester, and Alkybenzene oils. Input Voltage • 12 Volt DC -5% +10% (measured at the valve leads) Inlet Connection Size • 1/2" to 2.1/8" (ODF) inch Outlet Connection Size • 1/2" to 2.1/8" (ODF) inch

Sporlan distributor Type NX Series NXE Series SNXE Valves Series Element Material • Stainless Steel Maximum Operating Pressure • 48 bar, 700 psi Evaporator Equalizer Size • N/A, 1/4 " inch Capillary Tube Length • 0.762 m, 30 inch Maximum Ambient Temperature • 65 °C, 150 °F Application • Refrigeration