BELIMO NMB24-IP, IP54 - NEMA 1 ,Torque motor 10 Nm ,Nominal voltage AC/DC 24 V ,Power consumption in operation : 4.5 W ,Power consumption in rest position : 3 W ,Transformer sizing : 6 VA ,Control modulating, communicative, Hybrid, Cloud ,Conversion of sensor signals ,Ethernet 10/100 Mbit/s, TCP/IP, integrated web server ,Communication via BACnet IP, Modbus TCP and Cloud ,Direction of motion motor : selectable with switch 0/1 ,Weight : 1.5 lb [0.68 kg]
หมวดหมู่ : PRODUCTS , ELECTRICAL , BELIMO , NON FAIL-SAFE ACTUATORS ,
แบรนด์ : BELIMO distributor
Share
ผู้จำหน่าย Non Fail-Safe Actuators ยี่ห้อ BELIMO รุ่น NMB24-IP ราคาถูก นำเข้าตรงจากโรงงานผลิต Damper Actuator, 90 in-lb [10 Nm], Non fail-safe, AC/DC 24 V, Modulating, Communicative, Hybrid, Cloud, Cloud, BACnet/IP, Modbus TCP, Direction Of Motion Motor : selectable with switch 0/1 ตัวแทนจำหน่ายและนำเข้า สินค้าอุตสาหกรรมในประเทศไทย
BELIMO NMB24-IP Cloud capable and communicating Non FailSafe damper actuator for controlling dampers in typical commercial HVAC applications.
• Torque motor 10 Nm
• Nominal voltage AC/DC 24 V
• Control modulating, communicative, Hybrid, Cloud
• Conversion of sensor signals
• Ethernet 10/100 Mbit/s, TCP/IP, integrated web server
• Communication via BACnet IP, Modbus TCP and Cloud
Technical data
| Electrical data | |
| Nominal voltage | AC/DC 24 V |
| Nominal voltage frequency | 50/60 Hz |
| Nominal voltage range | AC 19.2...28.8 V / DC 21.6...28.8 V |
| Power consumption in operation | 4.5 W |
| Power consumption in rest position | 3 W |
| Transformer sizing | 6 VA |
| Parallel operation | Yes (note the performance data) |
| Electrical Connection | 18 GA appliance cable, 1/2" conduit connector and RJ45 socket (ethernet) |
| Overload Protection | electronic throughout 0...95° rotation |
| Data bus communication control | Cloud BACnet IP Modbus TCP |
| Number of nodes | BACnet / Modbus see interface description |
| Functional data | |
| Torque motor | 10 Nm |
| Operating range Y | 2...10 V |
| Operating range Y note | Hybrid via 2...10 V |
| Input impedance | 34 kΩ |
| Operating range Y variable | 0.5...10 V |
| Position feedback U | 2...10 V |
| Position feedback U note | Max. 0.5 mA |
| Position feedback U variable | VDC variable |
| Position accuracy | ±5% |
| Direction of motion motor | selectable with switch 0/1 |
| Manual override | external push button |
| Angle of rotation | 95° |
| Angle of rotation note | adjustable with mechanical stop |
| Running Time (Motor) | 150 s / 90° |
| Running time motor variable | 70...220 s |
| Adaptation Setting Range | manual |
| Noise level, motor | 45 dB(A) |
| Position indication | Mechanical, pluggable |
| Safety data | |
| Protection class IEC/EN | III, Safety Extra-Low Voltage (SELV) |
| Power source UL | Class 2 Supply |
| Degree of protection IEC/EN | IP54 IP54 when using protective cap or protective grommet for RJ45 socket |
| Degree of protection NEMA/UL | NEMA 1 |
| Enclosure | UL Enclosure Type 1 |
| EMC | CE according to 2014/30/EU |
| Agency Listing | cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02 CE acc. to 2014/30/EU and 2014/35/EU |
| Quality Standard | ISO 9001 |
| UL 2043 Compliant | Suitable for use in air plenums per Section 300.22(C) of the NEC and Section 602 of the IMC |
| Type of action | Type 1 |
| Ambient humidity | Max. 95% RH, non-condensing |
| Ambient temperature | -22...122°F [-30...50°C] |
| Storage temperature | -40...176°F [-40...80°C] |
| Weight | 1.5 lb [0.68 kg] |
| Housing material | UL94-5VA |
Product features
Mode of operation
• The actuator is controlled via the Cloud, BACnet IP or Modbus TCP and drives to the position defined by the control signal. Various data points can be written and read via the same interfaces.
Hybrid mode:
The actuator receives its analog control signal from the higher level controller and drives to the position defined. Using the Cloud, BACnet IP or Modbus TCP, various data points can be read and with the exception of the control signal written.
Converter for sensors
• Connection option for two sensors (passive sensor, active sensor or switching contact). The actuator serves as an analog/digital converter for the transmission of the sensor signal to the higher level system.
Communication
• The configuration can be carried out through the integrated web server (RJ45 connection to the web browser), by communicative means or via the Cloud.
• Additional information regarding the integrated web server can be found in the separate documentation.
ติดต่อขอใบเสนอราคา ช่องทางโทรศัพท์ และ ไลน์
คุณแมน : 02-943-4814
E-mail : pneutecthai@gmail.com
Line : @pneutecthai
