BELIMO NMX24-MFT | Damper Actuator

Name: BELIMO NMX24-MFT | Damper Actuator
Brand: BELIMO distributor
SKU: NMX24-MFT
Availability: InStock

คุณสมบัติสินค้า:

BELIMO NMX24-MFT ,IP54 - NEMA 2 ,Torque motor 90 in-lb [10 Nm] ,Nominal voltage AC/DC 24 V ,Power consumption in operation : 3.5 W ,Power consumption in rest position : 1.3 W ,Transformer sizing : 6 VA ,Control MFT/programmable ,Operating modes optional : variable (VDC, PWM, on/off, floating point) ,Direction of motion motor : selectable with switch 0/1 ,Weight : 1.2 lb [0.54 kg]

เพิ่มรายการโปรด

เปรียบเทียบ

หมวดหมู่ : PRODUCTS , ELECTRICAL , BELIMO , NON FAIL-SAFE ACTUATORS ,

แบรนด์ : BELIMO distributor

ผู้จำหน่าย Non Fail-Safe Actuators ยี่ห้อ BELIMO รุ่น NMX24-MFT ราคาถูก นำเข้าตรงจากโรงงานผลิต Configurable Damper Actuator, 90 in-lb [10 Nm], Non fail-safe, AC/DC 24 V, MFT/programmable, 2...10 V, Direction Of Motion Motor : selectable with switch 0/1 ตัวแทนจำหน่ายและนำเข้า สินค้าอุตสาหกรรมในประเทศไทย

BELIMO NMX24-MFT Customizable Non Fail-Safe multifunction technology actuator for controlling dampers in typical commercial HVAC applications.

• Torque motor 90 in-lb [10 Nm]
• Nominal voltage AC/DC 24 V
• Control MFT/programmable
• Position feedback 2...10 V

Technical data

Electrical data
Nominal voltage	AC/DC 24 V
Nominal voltage frequency	50/60 Hz
Nominal voltage range	AC 19.2...28.8 V / DC 21.6...28.8 V
Power consumption in operation	3.5 W
Power consumption in rest position	1.3 W
Transformer sizing	6 VA
Electrical Connection	18 GA plenum cable with 1/2" conduit connector, degree of protection NEMA 2 / IP54, 1 m 3 m and 5 m
Overload Protection	electronic throughout 0...95° rotation

Functional data
Torque motor	90 in-lb [10 Nm]
Operating range Y	2...10 V
Operating range Y note	4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)
Input impedance	100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mA, 1500 Ω for PWM, On/Off and Floating point
Operating range Y variable	Start point 0.5...30 V End point 2.5...32 V
Operating modes optional	variable (VDC, PWM, on/off, floating point)
Position feedback U	2...10 V
Position feedback U note	Max. 0.5 mA
Position feedback U variable	VDC variable
Direction of motion motor	selectable with switch 0/1
Manual override	external push button
Angle of rotation	Max. 95°
Angle of rotation note	adjustable with mechanical stop
Running Time (Motor)	150 s / 90°
Running time motor variable	45...170 s
Noise level, motor	45 dB(A)
Position indication	Mechanical, 30...65 mm stroke

Safety data
Power source UL	Class 2 Supply
Degree of protection IEC/EN	IP54
Degree of protection NEMA/UL	NEMA 2
Enclosure	UL Enclosure Type 2
Agency Listing	cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and 2014/35/EU
Quality Standard	ISO 9001
UL 2043 Compliant	Suitable for use in air plenums per Section 300.22(C) of the NEC and Section 602 of the IMC
Ambient humidity	Max. 95% RH, non-condensing
Ambient temperature	-22...122°F [-30...50°C]
Storage temperature	-40...176°F [-40...80°C]
Weight	1.2 lb [0.54 kg]
Housing material	UL94-5VA

Product features

Application
• For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications

• The actuator is mounted directly to a damper shaft up to 1.05" in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft.

• The default parameters for 2...10 V applications of the ..MFT actuator are assigned during manufacturing. If necessary, custom versions of the actuators can be ordered. The parameters can be changed by two means: pre-set and custom configurations from Belimo or on-site configurations using the Belimo PC-Tool software.

Operation
• The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement.

• The NMB(X) series provides 95° of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover.

• The NMB(X)24-MFT actuators use a brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator’s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode.

• Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions.

Typical specification
• Proportional control damper actuators shall be electronic direct-coupled type, which require no crank arm and linkage and be capable of direct mounting to a shaft from 1/4" to 1/2" diameter. Actuators must provide proportional damper control response to a 2 to 10 VDC or, with the addition of a 500Ω resistor, a 4 to 20 mA control input from an electronic controller or positioner. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have manual override on the cover. Run time shall be constant and independent of torque. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.