Pneutecthai
โดยปกติจะตอบกลับภายในไม่กี่ชั่วโมง
Quotation : pneutecthai@gmail.com
เริ่มแชท

BELIMO SM24A-MOD | Non Fail-Safe Actuators

คุณสมบัติสินค้า:

BELIMO SM24A-MOD ,IP54 - NEMA 2 ,Air damper size up to approx. 4 m² ,Torque motor 20 Nm ,Nominal voltage AC/DC 24 V ,Power consumption in operation : 3.5 W ,Power consumption in rest position : 1.4 W ,Power consumption for wire sizing : 6 VA ,Control modulating, communicative, Hybrid ,Conversion of sensor signals ,Communication via BACnet MS/TP, Modbus RTU, Belimo-MP-Bus or conventional control ,Direction of motion motor : selectable with switch 0/1 ,Weight : 2.3 lb [1.0 kg]

หมวดหมู่ : PRODUCTS ELECTRICAL BELIMO NON FAIL-SAFE ACTUATORS

แบรนด์ : BELIMO distributor

Share

ผู้จำหน่าย Non Fail-Safe Actuators ยี่ห้อ BELIMO รุ่น SM24A-MOD ราคาถูก นำเข้าตรงจากโรงงานผลิต Rotary Actuator, 180 in-lb [20 Nm], AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, 150 s (86...346 s), IP54 Direction Of Motion Motor : selectable with switch 0/1 ตัวแทนจำหน่ายและนำเข้า สินค้าอุตสาหกรรมในประเทศไทย

BELIMO SM24A-MOD Communicative damper actuator for adjusting dampers in technical building installations

• Air damper size up to approx. 4 m²
• Torque motor 20 Nm
• Nominal voltage AC/DC 24 V
• Control modulating, communicative, Hybrid
• Conversion of sensor signals
• Communication via BACnet MS/TP, Modbus RTU, Belimo-MP-Bus or conventional control

Technical data

Electrical data
Nominal voltageAC/DC 24 V
Nominal voltage frequency50/60 Hz
Nominal voltage rangeAC 19.2...28.8 V / DC 21.6...28.8 V
Power consumption in operation3.5 W
Power consumption in rest position1.4 W
Power consumption for wire sizing6 VA
Connection supply / controlcable 1 m, 6 x 0.75 mm²


Functional data
Torque motor20 Nm
Torque variable25%, 50%, 75% reduced
Communicative controlBACnet MS/TP
Modbus RTU (ex works)
MP-Bus
Operating range YDC 2...10 V
Operating range Y variableDC 0.5...10 V
Position feedback UDC 2...10 V
Position feedback U noteMax. 1 mA
Position feedback U variableStart point DC 0.5...8 V
End point DC 2...10 V
Position accuracy±5%
Direction of motion motorselectable with switch 0/1
Direction of motion noteY = 0%: At switch position 0 for ccw rotation or 1 for cw rotation, respectively
Direction of motion variableelectronically reversible
Manual overridewith push-button, can be locked
Angle of rotationMax. 95°
Angle of rotation notecan be limited on both sides with adjustable
mechanical end stops
Running Time (Motor)150 s / 90°
Running time motor variable86...346 s
Adaptation setting rangemanual
Override control, controllable via bus communication
MAX (maximum position) = 100%
MIN (minimum position) = 0%
ZS (intermediate position) = 50%
Override control variable
MAX = (MIN + 32%)...100%
MIN = 0%...(MAX – 32%)
ZS = MIN...MAX
Noise level, motor45 dB(A)
Mechanical interfaceUniversal shaft clamp reversible 10...20 mm
Position indicationMechanically, pluggable


Safety data
Safety Protection class IEC/ENIII safety extra-low voltage (selv)
Protection class ULUL Class 2 Supply
Degree of protection IEC/ENIP54
Degree of protection NEMA/ULNEMA 2
EnclosureUL Enclosure Type 2
EMCCE according to 2014/30/EU
Certification IEC/ENIEC/EN 60730-1 and IEC/EN 60730-2-14
Certification ULcULus according to UL60730-1A, UL60730-2-14 and CAN/CSA E60730-1:02
Mode of operationType 1
Rated impulse voltage supply / control0.8 kV
Control pollution degree3
Ambient temperature-22...122°F [-30...50°C]
Storage temperature-40...176°F [-40...80°C]
Ambient humiditymax. 95% r.H., non-condensing
Weight2.3 lb [1.0 kg]


Product features

Mode of operation
• The actuator is fitted with an integrated interface for BACnet MS/TP, Modbus RTU and MP-Bus. It receives the digital positioning signal from the control system and returns the current status.

Converter for sensors
• Connection option for a sensor (passive, active or with switching contact). In this way, the analogue sensor signal can be easily digitised and transferred to the bus systems : BACnet, Modbus or MP-Bus.

Configurable actuators
• The factory settings cover the most common applications. Single parameters can be modified with the Belimo Service Tools MFT-P or ZTH EU.

• The communication parameters of the bus systems (address, baud rate etc.) are set with the ZTH EU. Pressing the “Address” button on the actuator while connecting the supply voltage, resets the communication parameters to the factory setting. Quick addressing: The BACnet and Modbus address can alternatively be set using the buttons on the actuator and selecting 1...16. The value selected is added to the «Basic address» parameter and results in the effective BACnet and Modbus address.

Combination analogue - communicative (hybrid mode)
• With conventional control by means of an analogue positioning signal, BACnet or Modbus can be used for the communicative position feedback

Simple direct mounting
• Simple direct mounting on the damper shaft with a universal shaft clamp, supplied with an anti-rotation device to prevent the actuator from rotating.

Manual override
• Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).

Adjustable angle of rotation
• Adjustable angle of rotation with mechanical end stops.

High functional reliability
• The actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.

ติดต่อขอใบเสนอราคา ช่องทางโทรศัพท์ และ ไลน์  
- คุณจุฑามาศ (กุ๊กไก่) : 02-943-4814

E-mail : pneutecthai@gmail.com

Line : @pneutecthai  

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้